Home » Products » Bluetooth modules
Product Categories
ZXM-10BLE New Embedded Low energy Bluetooth v4.0 Module

The ZXM-10BLE module (is based on the TI CC2540) is a cost-effective, low-power, true system-on-chip (SoC) module with on-board antenna for Bluetooth low energy applications. It enables robust BLE master or slave nodes to be built with very low total bill-of-material costs. The ZXM-10BLE combines an excellent RF transceiver with an industry-standard enhanced 8051 MCU, in-system programmable flash memory, 8-KB RAM, and many other powerful supporting features and peripherals. The ZXM-10BLE is suitable for systems where very low power consumption is required. Very low-power sleep modes are available. Short transition times between operating modes further enable low power consumption. The ZXM-10BLE Bluetooth module is compliant with the Bluetooth 4.0 BLE standard. The module can function as a serial data pass-through, PIO input and output control, PWM output control functions. The module has two operating modes: a) command mode and b) data mode. In the data mode the module can be operated as a Bluetooth Master or a Slave. When the module is in the command mode the user can send the AT commands. These commands include the module’s configuration parameters. The ZXM-10 BLE module has a mode Status indicator pin that will be low if the module is in the command mode and high if the module is in the DATA mode. Typically, a LED is connected to a PIO pin as to provide a visual indicator of the modules operational mode. The switch from command mode from data mode is automatic once the wireless connection has been terminated.


  • Operating Frequency Band 2.40 GHz~2.48GHz unlicensed ISM Band
  • Bluetooth Low energy Spec. v4.0 compliant based upon the TI CC2540
  • Class 2 type Output Powerup to 4.5dBm
  • Configurable as Master or Slave
  • Optional I2C communications
  • USARTs with support for several serial protocols (Default Profile is SPP emulation)
  • 17 general-purpose I/O pins
  • Can be Controlled via AT command set
  • Full RAM and register retention in all power modes
  • Nominal supply voltage at 3.3V±10%
  • Surface-mount, Size: 27.0mm×13.0mm×2.2mm (Tolerance = ±0.2mm
  • Multiple Profiles supported (Contact ZBA)
  • Carrier Frequency
  • Modulation
  • Channel Bandwidth
  • Number of Channels
  • Frequency Hopping
  • Receive Sensitivity
  • Transmission Power
  • Maximum Data Throughput
  • Output Interface
  • Power Supply
  • Operating Temperature Range
  • Storage Temperature Range
  • Dimensions
  • Antenna
  • 2402MHz to 2480MHz in 2MHz steps
    GFSK, 1Mbps, 250KHz deviation
    1600hops/sec, 1MHz channel space
    -87 dBm typ. @0.1% BER
    +4dBm max.
    Asynchronous : 1 Mbps
    Full speed UART
    3.3V ±10%
    -20°C to 85°C
    -40°C to 85°C
    meandering Line PCB