BT44-111S is a Class 1 surface mount Bluetooth Module

BT44-111S is a Class 1 surface mount Bluetooth Module

BT44-111S is a Class 1 surface mount Bluetooth Module

Category: ,
Video Url :

The ZBA BT44-111S is a Class 1 surface mount Bluetooth module based upon the CSR Blue-core 4 chip. The BT44-111S has been designed to be embedded into a variety of end user equipment such as Medical devices, automotive applications etc. This class 1 module is especially desireable when the enclosure of the equipment is constructed of metal or ferrous material, thus requireing the use of an external antenna. The BT44-111S has a 50 ohm output and can drive essentially all antrenna designed for 2.4 GHz operation, the module and device firmware are fully compliant with the Bluetooth specification V2.0 The BT44-111S is a class 1 Bluetooth module that has a range of up to 100 meters (approximately 300 feet). Additionally, the firmware supports over the air data rates of up to 3Mbps as described in the EDR portion of the Bluetooth version 2.0 specification. Contained on the module is a 8MB Flash memory chip which contains the firmware and embedded microcode. The Flash memory can be upgraded via the UART. The module can support different Bluetooth profiles, although the most popular profile for data transfer is the Serial Port Profile (SPP). The dimensions of the module is 27.5 x 14.5 x 2 mm. The module is a 36 pin leadless device with pin connections on both sides fo the module.

Test Table test



FEATURES: Operating Frequency Band 2.40 GHz~2.48GHz unlicensed ISM Band Bluetooth Spec. v2.0 Compliant EDR Enhanced Data Rate (EDR) compliant with v2.0.E.2 of specification for both 2Mbps and 3Mbps modulation modes Class 1 Output Power Range up to 100m Support Firmware Upgrade (via The UART) Solder down connections Active Bluetooth Connections signal USB 2.0 and UART Host Interface PCM Audio Interface Low Voltage Power Supply, 2.7V to 3.6V Built-in 8Mbit Flash Memory Low Power Modes Available: Park, Sniff, Hold and Deep Sleep Dimensions: 27.5 x 14.5 x 2 mm Evaluation board available.


Medical Equipment POS Systems Telemetry Systems Industrial Automation PCs, PDAs PCMCIA, RS232 Adapters Cordless Phone Digital Camera Automotive Barcode and RFID scanners Lighting Control Robotics Computer Accessories (CF cards,USB Dongles) Mice, Keyboard Joystics Printer Adapter Access Point to LAN/Dial Up Network

Product Ordering PN

BT44-111S-XXX Class 1 Bluetooth Module requires an External Antenna XXX SPP for Serial Port Profile XXX HCI for Host controller Interface over UART (special request) XXX HID for Human Interface device (special request) XXX OOX for Object push/ pull and FTP (special request)